LP7156 — Vertical Double Ended Beam Load Cell, 50-60 klb
NTEP Class IIIL double ended beam load cell from 50 klb to 60 klb in a vertical mount format with 1.78 in end eyes and NPT entry.
Overview
The LP7156 is a vertical mount double ended beam load cell for scale frames where the beam stands on end rather than lying flat, covering 50 and 60 klb. It carries NTEP Class IIIL approval with 10,000 multiple intervals under certificate 26-093. Rated output is 3.0 ± 0.003 mV/V, zero balance ±1% F.S., combined error ±0.02% F.S. and non-repeatability ±0.01% F.S. Creep error is ±0.025% F.S. over 30 minutes, and temperature effect is ±0.036% F.S. on zero and ±0.027% F.S. on output per 18 F. Input resistance is 700 ±10 ohm, output 702 ±2 ohm, insulation resistance 5,000 Mohm at 50 VDC. Safe overload is 150% F.S., destructive load 300% F.S., and excitation is 10-15 V AC/DC recommended with 20 V AC/DC maximum. Alloy steel or stainless steel construction is sealed to IP67 or IP68. The beam is 8.25 in long, 2.45 in wide and 1.94 in high with 1.78 in end eyes, so it carries the load through a vertical pin and takes up less deck height than a flat laid beam in the same capacity. Cable entry uses 1/2-14NPT threads, and a four core cable of 0.24 in diameter is supplied at 52 ft.Specifications
|
Specification |
Value |
|
Model |
LP7156 / LP7156SS |
|
Rated capacity |
50 / 60 klb |
|
Accuracy class |
NTEP Class IIIL, 10,000 multiple intervals, certificate 26-093 |
|
Rated output |
3.0 ± 0.003 mV/V |
|
Zero balance |
±1% F.S. |
|
Combined error |
±0.02% F.S. |
|
Non-repeatability |
±0.01% F.S. |
|
Creep error (30 min) |
±0.025% F.S. |
|
Temperature effect on zero |
±0.036% F.S. per 18 F |
|
Temperature effect on output |
±0.027% F.S. per 18 F |
|
Compensated temperature range |
14 to 104 F |
|
Operating temperature range |
-22 to 158 F |
|
Input / output resistance |
700 ±10 ohm / 702 ±2 ohm |
|
Safe overload / destructive load |
150% F.S. / 300% F.S. |
|
Excitation |
10-15 V AC/DC recommended, 20 V AC/DC maximum |
|
Material / protection |
Alloy steel or stainless steel, IP67 / IP68 |
|
Beam size |
8.25 in long, 2.45 in wide, 1.94 in high, 1.78 in end eyes |
|
Cable entry |
1/2-14NPT |
|
Cable |
4 core, 52 ft, 0.24 in diameter |
Features
Vertical Mount
Standing the beam on end saves deck height where a flat beam will not fit.
1.78 in End Eyes
Large end eyes take a heavy pin, so the load path stays simple.
NTEP Class IIIL
10,000 multiple intervals under certificate 26-093 for trade weighing.
IP67 or IP68
Sealed alloy or stainless body for outdoor decks and wet plants.
Applications
Need LP7156 for your application?
Tell us your capacity, accuracy class, and environment — our engineers will confirm fit and check live inventory.